So here we are again (if you read my immediate previous post 😊) – above is the starting Golden Absorbent Ground. I patterned it vertically on purpose, though relatively lightly compared to some absorbent grounds I prepared after this one. All part of seeing what I can do for when I’d like to, lol!
I have “formed” forms (like florals) with paint and – sometimes, marble dust, both acrylic and with water soluble oils, but the newness (to me) and unknowns of how molded/formed absorbent grounds would hold up, has me tiptoeing 😊
In addition, I already know there are slight alterations to the surface when I place the isolation layer and varnish, though less so w/the latter with matte vs gloss varnish.
It just means going slow on some things.
There are a few things I’ve picked up about watercolors and absorbent ground that have me moving a little faster in my experiments. But that’s for another post 😊
Below, after holding onto the absorbent ground blank canvas for probably over a week, are my 1st choices – and believe me, these are choices, not something I have to do – yes, my first choices defining the trees I see with masking fluid…
I could have chosen wider tree trunks, and defined the edges accordingly, but I saw and I liked the idea of this strand of skinny trees spread out across a natural forest ground.
Because the lines were long and mostly unbroken, the masking fluid would bead into a bubble here and there. At this time I didn’t know I could drag the bubble with a toothpick to string it out skinny again, but it worked out kinda fun anyway 😊
Where the lines joined or got wiggly, I just left them so. I figured if I couldn’t figure out what to do with them, how to make them work with the final image, I could simply paint over the areas left white. I realize now that probably wouldn’t have been any easy fix ‘cause of their length and how the background developed.
The idea was to preserve white space areas of skinny trees that would resist the washes, and thus allow me to create a smoothly transitioning background.
That, I realized, was what I really was experimenting to see how it’d work.
Or not, lol!
Below, another day later, is my 1st wash lay-in. Plus something else (those long brown lines) 😊
The washes were a simple process of tiny amounts of pigment and lots of water!
The brown lines are another resist to parallel the resist of the masking fluid lines, they’re acrylic, which I’d just read, can act as a resist when dry, since they wouldn’t absorb or attach with the watercolor washes like the absorbent ground.
I liked what I had so far, but felt it looked too tight at the top, like I was crouching in a field of grass, not looking at a screen of trees, so I flipped the canvas vertically – as shown below.
Now, as seen above, I had a sky at the top and an anchor of ground in the bottom foreground and I laid in more washes of colors.
And below, the next day, I began peeling some of the masking tape on the right side, painting in the left side ridges of a few masking fluid lines left in near them, to see what look that gave, and started a tree-top sky look of washes.
You can also see my first dabs of – if I liked them – snow.
If I didn’t like them, I figured, this being watercolor, I could re-wet them, and wash them away or blend them with color into the background.
We had a dark cloudy day, and I let the canvas rest, choosing to paint the sides of several 6x6s I feel “may” be done. Those I do strictly with acrylic paint and medium w/a few drops of water in layers til the color feels like it really fits the painting on the front. But that’s another post for later too!
Below, the following day, the sun back like it’d had a good rest, lol, I placed more snow in the air, taking my time.
Several, actually most of the snow I’d placed two days earlier had faded considerably!
The truth of the truism I kept reading that acrylics dry darker and watercolors dry lighter was really becoming apparent. The acrylic sides I’d painted the cloudy day before looked too dark, and the nifty little snow flakes from two days prior were quite faded.
Fortunately my litany of packages from Amazon and trips to Michaels were paying off.
I was not only piecing together some quality watercolor paints and useful tools, but also received my test tube of gouache. Unlike watercolors’ transparent nature, gouache – white gouache – is opaque.
My wife (half French) has told me several times how to say “gouache” but I still feel I’m saying something offensive, lol! 😂
I added more snow, plus painted the left sides of masking lines I might want to keep for their color and shape.
Later, once the piece is done, the gloss isolation layer and matte varnish will have to protect paint and masking fluid. The glossy isolation layer preserves the colors, and the clear matte varnish protects against dust etc, but restores the surface feel and matte finish of the completed work – as I found out via my 1st two 6x6s!
While true that “something” could still gouge the dried masking fluid lines, that same something would then also gouge and damage the watercolor paint. The same as would be true for a dried acrylic or oil painting, though the acrylic can take a harder bump or poke, as I’ve found from unwanted experience 😊
Below is where I finished after working on it Friday, Jan 24th.
While much more complete – even now has a nice “gouache” sig bottom left – with more masking fluid lines stripped away, esp far left side, and intact masking fluid lines also enhanced with white gouache on their left sides, with more snow touched up to stay more visible, I don’t think it’s quite finished. Even with touches of a special blue Daniel Smith watercolor I picked up at Michaels the day before.
Very intense, I literally took a scuff mark amount, watered it down and washed the deeper blues top and bottom along edges of the already there greens and lighter blues.
Saturday I want to see how much fade has occurred, plus probably toothpick (using the term as a verb here) pin points of white onto the larger but fading watercolor whites I placed Friday.
Those latter larger white spots, less than half a dozen, aren’t shown, the light just wouldn’t let me capture a shot that didn’t come out to harsh to represent the work.
This image has been very difficult for me to capture well except in ideal soft but clear light.
If your screen allows it, expand the image of this last shot and you can see the details much more clearly. At least on my iPad Pro I can.
Once I’m all done, I’ll try to post a detail shot along with the final image ❤️
So About the Title of This Painting
I talked with my wife about the title for this little 6×6. She’s from Vermont, born & raised, went all the way through to the University of Vermont on a full scholastic scholarship (is that redundant? No, clarifying; it wasn’t athletic 😊) and I wanted her feedback on my working title, The First Snow.
I wanted a little more —
Her: We called it a snow shower
I shook my head no
Her: Or a sprinkle of snow
Her: You want something more artistic
Me: Yeah. Seeing snow was special for me.
She nodded her head, smiled –
The First Twinkle of Snow
Me: Yeah! That’s what I saw 💕
May your creative efforts be more rewarding than frustrating!
It helps me to remember that most fun things are a mix of something or other, lol! 😊
My Related Amazon Affiliate Search Products For This Post
My Latest Posts On My Website!
- August 04, 2021 – The Resurgence of COVID-19There’s few times life or death issues are so widespread they not only engulf those close to us, but nearly everyone one hears about – this is one of those times…KVUE news, whose images I’m using for this post, has an article title, “‘The choice now becomes vaccination or ventilator.’ 230 unvaccinated people hospitalized for COVID-19 in Austin in 2 weeks, versus 47 vaccinated.”
- August 03, 2021 – Working a New 16×20 Acrylic, Working Title : Testing the Water, Refining the Figure, Developing the BackgroundI wanted to do more on this but things are happening re Covid, in my life. I’ll have more on this very soon – nothing w/me or family here in Austin (despite horrid #s lately), but nearby, also here in Texas. Wonderful how fluid and flexible art is, giving us challenges one day, inspiration on another, and solace even when needed.
- August 02, 2021 – Prepping a New 16×20 Acrylic, Working Title : Testing the Water, 1st Figure Lay-inI included my most recent updated image from a post a few days ago further below. Besides the figure work (not yet complete), you can see where I continued to rework the area around the figure, setting her off more completely.
- August 01, 2021 – Some Interruptions in Life are BlessingsJust back from an incredible trip to the Galapagos west of Ecuador, wife & I got the opportunity to have the youngest grandchild over. This is from our mid-morning walk in warm dappled light ❤️ I only wish I’d realized the value of this with our own children more fully…
- July 31, 2021 – Prepping a New 16×20 Acrylic, Working Title : Testing the WaterThe initial goal was to simply select and mark the area for my figure. Then I freely applied Golden’s light molding paste, leaving the selected area for my figure much more level, and forming the paste into potentially vegetative designs as inspiration and malleable ground meshed —
- July 30, 2021 – What a Difference a New Keyboard Makes : LENRICH iPad pro 12.9 case with keyboardThis is an older now discontinued keyboard, but one of the few still available for my IPad Pro 2nd generation model (current model is 5th generation I believe), but I’m impressed with it enough to post about it and (if all continues well) my renewed ease of use not having to use the onscreen keyboard for blog posts, emails etc – that’s a big deal for me, lol! 😊
- July 29, 2021 – Whew! Yesterday Was a Day of Plowing Through, lol!Above is a picture of me November 2019 (notice the weather is warm but hot, finally 😊) and I look just a bit worn out? I’d just climbed the 218 steps to top of Old Baldy near Wimberley Texas! That’s kinda how I felt yesterday, only without as nice a view, lol! I’ll just say that….
My Related Posts Here On My Blog
Thanks everyone! 😊
Twitter / Instagram / FB @FelipeAdanLerma
Amazon Author Page – https://amzn.to/2YpgyUf
Fine Art America (FAA) – https://fineartamerica.com/profiles/felipeadan-lerma.html